ECLIPSE #9800WCi-R9

9800i_1-1The Eclipse i-Series model #9800WCi-R9 is one of the many new Intelligent Flushing & Monitoring Stations Kupferle offers to maintain safe residual levels and remove DBPs from consumers’ water. This permanently installed station incorporates a built-in chlorine analyzer to measure and record disinfectant residual levels based on a programmed sampling schedule. Using the Programmable Logic Control (PLC) interface, users can input minimum and desired residual levels, an initial blow-off time and a maximum flushing duration. The unit will then operate under these parameters and will flush when residuals fall below minimum prescribed levels and flush only the exact amount of water needed until desired detected residuals are attained. All residual and flushing data is recorded and can transferred to Microsoft Excel via a micro-SD card or transmitted using a SCADA system. Thermal enclosure has an insulation rating of R-9 and unit can be programmed to flush when temperatures fall below 40⁰F. Unit is self-draining, non-freezing based on depth of bury and is maintainable from above ground.  Chlorine analyzers comply with the EPA Method 334.0 which defines methods suitable for use in on-line chlorine residual monitoring for reporting purposes.  PATENTED

Options

• Depths of bury over 3' per 6"
• pH Sensor
• 24 VDC Pole-mounted solar package
• Dechlorination Basket
• Dechlorination inline drain
• Valve Rated at 220 psi
• Check valve (single)
• Upgraded RA-22 PLC w/SCADA hardwired I/O

ECLIPSE #9800i-GENESIS PHOTO GALLERY
ACCESSORIES