ECLIPSE #9700i

9700i_4The Eclipse i-Series model #9700i is one of the many new Intelligent Flushing & Monitoring Stations Kupferle offers to maintain safe residual levels and remove DBPs from consumers’ water. This portable analytical station easily attaches to any fire hydrant (2½” NST) and incorporates a built-in chlorine analyzer to measure and record disinfectant residual levels based on a programmed sampling schedule. Using the Programmable Logic Control (PLC) interface, users can input minimum and desired residual levels, an initial blow-off time and a maximum flushing duration. The unit will then operate under these parameters and will flush when detected residuals are below minimum prescribed levels and flush only the exact amount of water needed until the desired residuals are attained. All residual and flushing data is recorded and can be transferred to Microsoft Excel via a micro-SD card or can be transmitted using a SCADA system. Since this unit is portable, data from this unit can be used to maximize manual and/or automatic flushing efficiency.  Chlorine analyzers comply with the EPA Method 334.0 which defines methods suitable for use in on-line chlorine residual monitoring for reporting purposes.  PATENTED


  • • Sampling point bibb
  • • Multi-directional diverter
  • • Collar Lock Part #9708 (Yellow or Red)
  • • Meter Stand
  • • Dechlorination basket
  • • Special color powder-coated paint on box
  • • Valve rated at 220 psi
  • • Upgraded RA-22 PLC w/SCADA hardwired I/O